Favorite Product Ceramic Sand KilnCeramic Sand Kiln

Ceramic sand kiln for baking ceramic sand, clay, silt, clay, shale, fly ash, slag ceramsite. The rotary kiln can be used for ferrous metallurgy, nonferrous metallurgy, chemical industry, building materials (cement), non metallic minerals, refractory material, papermaking, environmental protection and other industries, has high furnace unit volume, long service life, high efficiency, stable operation, high heat efficiency, low heat loss, is to the calcining equipment.

 
Application:
The rotary kiln is widely used for calcining and production of dolomite, kaolin, bauxite, refractory material, cement, limestone, iron ore, titanium powder, activated carbon, Jiao Tan, powder, alumina, Magnesium Oxide, Zinc Oxide, special cement and other material ceramsite.
 
Working principle:
The main kiln body and a horizontal cylindrical is an angle of 3 ° placed on the roller. The material in the high end into the kiln, to do rotary movement function in the kiln, the material from a height (kiln) and tumbled to the lowest (kiln), at the same time, in the kiln head, a high pressure blower (coal or natural gas and other fuels) injected into the kiln, and the sufficient combustion the heat generated by the material, physical and chemical changes occur, the expansion, after cooling for ceramic.
Production of fly ash ceramsite should adopt double cylinder rotary kiln, namely the preheating segment kiln body and drying section can be separately to control its speed, according to the state of raw materials to control the preheating time. Clay ceramsite in recent years due to the land resource constraints, in some areas has been banned production and use. But in some areas can use the river silt, waste mountain soil and other production. The process is: raw materials mixing - granulating - Screening - sintering stacking and transportation (bagging).
 
Performance characteristics:
1. Has the advantages of simple structure, has high furnace unit volume, long service life, high efficiency, stable operation, high heat efficiency, low heat consumption;
2. Automatic temperature control, over temperature alarm, two time enters the wind heat utilization, long service life of kiln lining;
3. Kiln of kiln tail seal technology and advanced equipment, stable operation, high yield;
4. Rational layout, process flow, high degree of automation;
5. Mechanical control operation, low labor intensity;
6. Calcination parameter real-time monitoring, firing in good quality;
7. Energy consumption than production, low operation cost.


Technical parameter:
Model Kiln body size Capacity
(t/h)
Speed
(r.p.m)
Motor power
(kw)
Weight
(kg)
Diameter(mm) Length(mm) Slope(%)
YZ-1433 1400 33000 4 1.2~1.9 0.26~2.61 18.5 47680
YZ-1636 1600 36000 4 1.6~2.2 0.168~1.68 18.5 51307
YZ-1832 1800 32000 4 1.9~2.6 0.155~1.55 22 76800
YZ-2030 2000 30000 3.5 2.2~2.8 0.148~1.48 22 83600
YZ-2236 2200 36000 3.5 2.6~3.8 0.156~1.56 30 93800
YZ-2332 2300 32000 3.5 3.0~4.5 0.156~1.56 30 97200
YZ-2436 2400 36000 3.5 3.8~5.3 0.132~1.32 37 11100
YZ-2540 2500 40000 3.5 4.5~7.0 0.132~1.32 37 139180
YZ-2550 2500 50000 3.5 7.0~10 0.5~1.05 55 180000
YZ-2560 2500 60000 3.5 8..2~12 0.3~1.0 55 217000
YZ-2742 2700 42000 3.5 7~10 0.45~1.35 40 165000
YZ-2830 2800 30000 4 12~15 0.8~1.45 55 196373
YZ-3045 3000 45000 4 20~25 0.5~1.5 75 200000
YZ-3060 3000 60000 4 26~32 0.44~1.33 75 257000
YZ-3652 3600 52000 4 35~43 0.55~2.06 125 395000
 

 

Tel:021-58991002; Fax:021-50676923; E-mail:sales@daiwomining.com

Adress:No.7469,Dongchuan Rd,Pudong New District,ShanghaiCity

Copyright © buy 2000-2020 Shanghai Daiwo Co., Ltd. All Rights Reservd