Chemical Material DryerChemical Material Dryer

 

Description:
Chemical material dryer is refers to the mechanical equipment for chemical raw materials for drying, this machine is mainly composed of rotors, the feed plate, driving device, supporting device and sealing ring parts. I plant chemical raw material drying equipment, using a new type of feed plate has multiple functions such as orientation, flow, feed, can make the material in the dryer full uniform radial section, is expected to act as thin and all, the whole state of heat flow entirely, achieve the goal of make full use of heat energy.
 
Working principle:
Chemical material drying equipment is to let the liquid or slurry material in steam or other heat carrier heating form a thin film of the surface of the drum, and in the process of one revolution of the drum was dry, using scraper scrape the product to show roller surface contact with the raw material form the membrane to dry again. Chemical raw material drying machine is mainly used in powder, granular material drying dehydration. Conventional heating such as fire, air, steam drying is using the principle of heat conduction, the heat from the heated objects outside into the inside, make the object center temperature gradually. Widely used in food, chemical, pharmaceutical industries such as viscosity, paste material production, drying process. With steam or heat conduction oil as heat source, large heating area, high thermal efficiency, heat evenly. On the drying rate, are compared.in the heat transfer and mass transfer process of wet material from the inside to the outside, large temperature gradient, keep the material membrane performance high evaporation strength. The drying time is short, generally about 7 to 30 seconds, suitable for heat-sensitive materials.
 
Characteristics:
1. Material pollution and uniform drying, at the same time can be greatly reduced drying temperature;
2. Dry velocity increased by more than several times, usually more than 2 times higher than that of general drying oven, improve the production efficiency;
3. Indirect heating, the material will not be polluted, equipment maintenance is simple, easy to clean, safe and clean production.
4. Low operating cost, chemical raw material drying equipment cover an area of an area small.


Technical parameter:
Specifications Capacity
(t/h)
Power
(kw)
Cylinder speed
(r/min)
Reducer model Weight
(t)
Φ0.6×8 m 1.5-2.8 4 8 JZQ 250-16-Ⅰ 5.1
Φ0.8×10 m 3.0 4 7.5 JZQ 350-16-Ⅰ 6.9
Φ10×10 m 3.3-4.9 5.5 5.8 JZQ 400-16-Ⅰ 7.5
Φ1.2×10 m 4-6 7.5 4.8 ZL 50-16-Ⅰ 13.5
Φ1.5×12 m 4-6 10 4.8 JZQ 500-Ⅲ-2F 18.9
Φ1.5×15 m 7-12 18.5 4.8 ZQ 500-Ⅲ-2F 21
Φ1.8×12 m 7-12 18.5 4.1 JZQ 50-16 Ⅱ-2 22.83
Φ2.2×12 m 12 18.5 3.2 JZQ 650- Ⅲ 37.6
Φ2.2×14 m 12 22 3.2 JZQ 650- Ⅲ 40
Φ2.2×16 m 10-13 30 3.2 JZQ 750- Ⅲ 45
Φ2.4×14 m 10-14 30 3 JZQ 750- Ⅲ 51
Φ2.4×18 m 25 37 3 ZL 85-13- Ⅰ 54
Φ2.4×20 m 32-36 37 3 ZL 85-13-Ⅰ 54.14
Φ3×20 m 40-50 55 2.59 ZL 100-16-Ⅰ 78
Φ3×25 m 45-58 75 2.59 ZL 100-16-I 104.9
 
 
 

Tel:021-58991002; Fax:021-50676923; E-mail:sales@daiwomining.com

Adress:No.7469,Dongchuan Rd,Pudong New District,ShanghaiCity

Copyright © buy 2000-2020 Shanghai Daiwo Co., Ltd. All Rights Reservd