Slag DryerSlag Dryer

Slag dryer  is mainly composed of a rotating cylinder body, fan equipment, high-speed breaking equipment, lifting plate, self cleaning device, transmission device, conveying equipment, air equipment, reducer, supporting device and a sealing device and other components. The drying machine is mainly used for a drying machine drying slag, and has the advantages of simple structure, convenient use, is a kind of equipment for the drying machine more affordable, this series of drying machine can be used for drying of iron and steel smelting material lava produced by rapid water quenched slag, but also can be used for drying carbide slag, limestone, clay, sand, quartz sand, slag and other materials.
Furnace slag drying machine is suitable for various combustion: high boiling furnace, pulverized coal powder furnace and artificial coal stove. Slag dryer design is reasonable, the production of sophisticated, stable performance, advanced technology, high yield, low energy consumption, small occupied area, high degree of mechanization.
Slag dryer is widely used in building materials, metallurgy, mineral processing, chemical, cement and other industries, can be used for drying slag, carbide slag, limestone, clay, sand, quartz sand, water slag wet, the material can be used slag drying machine, widely used in building materials, metallurgy, mineral processing, chemical, cement industry.
1. The amount is large, strong anti overload capacity, high thermal efficiency, reduce coal consumption of about 20%, directly reduce the cost of drying. The size of the transmission gear pin to change gear, replacing the traditional cast steel gear, saving the cost of investment, but also reduce the repair costs and time;
2. In the design in order to achieve the best drying effect, the concurrent flow drying method, material and heat flow into the drying equipment from the same side, the dryer outlet temperature is low, high thermal efficiency;
3. The internal structure of the innovation, strengthened the already dispersed material cleaning and heat transfer effect, eliminates the sticking phenomenon the cylinder inner wall;
4. The use of discharging device material, to the model, put an end to the slag drying machine feeding jam, discontinuous, inhomogeneous and material return phenomenon, reducing the dust removing system load for you. The device feeding system for technological innovation in many aspects in the young, especially the new combination type lifter device uses, to overcome the traditional drying machine "wind tunnel" phenomenon;
5. Can meet the needs of different users drying of the slag material particle size and moisture content.

Technical parameter:
Model(mm) Gradient (%) Speed(r/min) Inlet temperature (℃) Power(kw) Volume(m) Capacity(t/h) Weight(t)
Φ600×6000 3-5 3-8 ≤700 3 1.69 0.5-1.5 2.9
Φ800×8000 3-5 3-8 ≤700 4 4.01 0.8-2.0 3.5
Φ800×10000 3-5 3-8 ≤700 4 5.02 0.8-2.5 4.5
Φ1000×10000 3-5 3-8 ≤700 5.5 7.85 1.0-3.5 5.6
Φ1200×10000 3-5 3-8 ≤700 7.5 11.30 1.8-5 14.5
Φ1200×12000 3-5 3-8 ≤700 11 13.56 2-6 14.8
Φ1500×12000 3-5 2-6 ≤800 15 21.19 3.5-9 17.8
Φ1800×12000 3-5 2-6 ≤800 18 30.52 5-12 25
Φ2200×12000 3-5 1.5-6 ≤800 18.5 45.59 6-15 33
Φ2200×18000 3-5 1.5-6 ≤800 22 68.38 10-18 53.8
Φ2200×20000 3-5 1.5-6 ≤800 30 75.98 12-20 56
Φ2400×20000 3-5 1.5-5 ≤800 37 90.43 18-30 60
Φ3000×20000 3-5 1.5-5 ≤800 55 141.3 25-35 78
Φ3000×25000 3-5 1.5-5 ≤800 75 176.6 32-40 104.9


Related Products

Metal Cutting Dryer

Tel:021-58991002; Fax:021-50676923;

Adress:No.7469,Dongchuan Rd,Pudong New District,ShanghaiCity

Copyright © buy 2000-2020 Shanghai Daiwo Co., Ltd. All Rights Reservd