Screw Extrusion MachineScrew Extrusion Machine

Screw extrusion machine can be widely used in high humidity worse slag dewatering homework before drying of material, such as vinasse, pomace, medical, cassava dregs, such as dehydration, can remove about 20% of the moisture in the material, greatly reduce the burden of dryer, the yield increased significantly, reduce the energy consumption, is dry before indispensable processing equipment, high wet materials after dehydration, the material can be directly into the dry equipment, greatly reduce the energy consumption of drying.

Working principle:
Speed regulating motor operating normally, the material from the feed tank even join, enter the material after the machine under the spiral rotor blades to push forward along the axis, advancing the process of material by the change of pitch and adjust the action of the damper, a huge extrusion, make the material under the action of external force to mechanical dehydration, water through the mesh at the outlet, dehydration after discharge of the material in the container.

Technical Parameter:

​Model 250 300 350 400 450 500
Power(kw) 7.5 11 11 15 15 18.5
Speed ​​range (r/mm) 125----------------------------------------1250
Weight (t) 0.75 1.1 1.5 2.0 3.5 5.0
Capacity(t/day) 40 70 90 120 160 200
Area(m2 2.1 2.1 2.1 5.04 5.04 5.04

Tel:021-58991002; Fax:021-50676923;

Adress:No.7469,Dongchuan Rd,Pudong New District,ShanghaiCity

Copyright © buy 2000-2020 Shanghai Daiwo Co., Ltd. All Rights Reservd