Pellet DryerPellet Dryer

 

Introduction:
Pellet dryer is a kind of processing a large amount of material drying equipment, reliable operation, large elasticity of operation, strong adaptability, processing capacity is big, the material of strong adaptability, can dry all kinds of materials, and equipment operation is simple and reliable. It is widely used in building materials, metallurgy, chemical industry, cement industry, etc. Can be used for drying of pellets of iron concentrate, slag, limestone, coal powder, slag, clay or other materials, particularly for pellets of iron concentrate, slag, pulp effect is more obvious. The company developed a new generation of slag, pulp, more energy saving, consumption reduction pellet dryer. Adopting new type of feed plate, with multiple functions such as orientation, flow, feed. Can make the material in the dryer full uniform radial section, is expected to act as thin and all, the whole state of heat flow entirely, achieve the goal of make full use of heat energy. Efficient dryer choose reasonable operating parameters, coal consumption quantity and consumption quantity reduced by more than 8% generally dryers, output capacity more than 10% increase.
 
Working principle:
Pellet dryer is mainly composed of rotors, feed board, transmission device, supporting device and sealing ring and other components. Drying cylinder is a horizontal line with a slightly tilted into the rotation of the cylinder, materials from high end to join, and the high temperature hot flue gas and material flow into the cylinder, with cylinder rotation, the material operation to lower end. Copy on the inner wall of the cylinder on the plate and sprinkle with copy material, the contact surface is increased and the air flow of material, in order to improve the drying rate and promote the material, after drying the product from the bottom of the lower part.
 
Main characteristics:
1. The pellet dryer dryer capacity big, less fuel consumption, dry low cost;
2. Pellet dryer has the characteristics of high temperature resistant, can use of materials at high speed, high temperature hot air drying;
3. Extensible ability is strong, design considering the production surplus, even a modest yield increase, also need not replace the equipment;
4. The structure of the equipment used for self-aligning tug, tug with a hoop with good, greatly reduces the wear and power consumption;
5. Specially designed gear wheel structure, greatly reduced due to the equipment working tilt horizontal thrust;
6. Strong resistance to overload ability, cylinder run smoothly.


Technical parameter:
Model(mm) Gradient(%) Speed(r/min) Inlet temperature(℃) Power(kw) Capacity(t/h) Weight(t)
Ф600x6000 3-5 3-8 ≤700 3 0.5-1.5 2.9
Ф800x8000 3-5 3-8 ≤700 4 0.8-2.0 3.5
Ф800x10000 3-5 3-8 ≤700 4 0.8-2.5 4.5
Ф1000x10000 3-5 3-8 ≤700 5.5 1.0-3.5 5.6
Ф1200x10000 3-5 3-8 ≤700 7.5 1.8-5 14.5
Ф1200x12000 3-5 3-8 ≤700 11 2-6 14.8
Ф1500x12000 3-5 2-6 ≤800 15 3.5-9 17.8
Ф1800x12000 3-5 2-6 ≤800 18 5-12 25
Ф2200x12000 3-5 1.5-6 ≤800 18.5 6-15 33
Ф2200x18000 3-5 1.5-6 ≤800 22 10-18 53.8
Ф2200x20000 3-5 1.5-6 ≤800 30 12-20 56
Ф2400x20000 3-5 1.5-5 ≤800 37 18-30 60
Ф3000x20000 3-5 1.5-5 ≤800 55 25-35 78
Ф3000x25000 3-5 1.5-5 ≤800 75 32-40 104.9
 
 

 

Tel:021-58991002; Fax:021-50676923; E-mail:sales@daiwomining.com

Adress:No.7469,Dongchuan Rd,Pudong New District,ShanghaiCity

Copyright © buy 2000-2020 Shanghai Daiwo Co., Ltd. All Rights Reservd